Addressable 12input 2output Multi-Module

The TX7223 Addressable 12 Input/ 2output Module is characterized as 12 inputs power limited and 2 outputs volt free relay. It is used to acknowledge normally open monitor signal from interface equipment then sending communication signal to the control panel, ideally for monitoring sprinkler system, pressure switch, position switch, signal valves and other third-party equipment such as conventional panel.

Brand:
Tanda UK
SKU:
TX7223

Addressable 12input 2output Multi-Module Overview

The unit manufactured base on the requirement of EN 54 part 18, European Standard.

The TX722 Module is compatible to the TX7004 Analogue Intelligent Fire Alarm Control Panel, produced by single manufacture T&A, to avoid addressable communication compatibility problem.

The output relay is normally used for overriding equipment such as lift return, door holder, smoke extract fans, air handling unit, auto dialler to fire brigade, BMS and etc.. In addition, the unit incorporates an intelligent processor that provides automatic monitoring for both open and short circuit of the input signal line. All interfaces can be seen on the panel and can be configured on the command builder to create requirement for fire event scenario, as each circuit has it own unique address, this module occupied 14 address.

Features and Benefits

• Built-in MCU processor and digital addressing
• 12 circuits Input Fire or Supervisory signal configuration
• 2 circuits 24Vdc/3A Output relay contact and a Control module
• Dis/Enable Input and output cable monitored
• LED status indicator
• Onsite Adjustable Parameter

TX7223-Addressable-12in-2out-Module
TX7223-Addressable-12in-2out-Module
Power Rating  
Input Voltage Loop Power:24VDC [21V to 28V]
External PSU 20 to 28VDC
Current Consumption Standby 1.5mA, Alarm: 40mA ((monitoring current))
Module  
Iutput Relay 12 Circuit: Normally Open dry contact
Input Resistance 5.1Kohms/ ¼ W
Relay Output 24VDC Power Limited
Output Relay 2 Circuit: Normally Open/ Close dry contact
Protocol/ Addressing T&A, Occupied 14 address
Indicator Status Normal: Single blink/Active: Steady/Fault: Double Blink
Material PCB
Dimension 142 mm x 90 mm
Weight 350 g
Operating Temperature -10°C to +50°C
Humidity 0 to 95% Relative Humidity, Non condensing

Related Products

FAQs

Q. Do you provide system design services?

A. Customization may be available for selected products. Feasibility, minimum quantities, costs and lead times depend on the product type and specific requirements

A. Yes. Share your BOQ, drawings or product list with quantities and technical requirements. We can help identify suitable products and prepare a quotation.

A. Compatibility cannot be assumed. It depends on the specific system, communication protocol and device models. Please contact us to verify before ordering.

Yes. Send us the product name, model, specifications or a reference photo, and we will check available sourcing options.

Yes. Send us the product name, model, specifications or a reference photo, and we will check available sourcing options.