Up to 100 m Beam Detection Distance
The TX7130 Conventional Reflective Beam Smoke Detector is designed for long-distance smoke detection across wide, open indoor spaces. Four selectable beam path ranges from 8 to 100 metres support large areas and high-ceiling applications.
Designed for Large & High-Ceiling Spaces
Long-range smoke detection for expansive indoor environments.
Dual-Mode Integration. Greater System Flexibility.
One detector, two integration modes — native addressable operation with compatible TANDA UK systems and conventional integration with other brands.
Assign a device address directly to the TX7130 for identification and monitoring by compatible TANDA UK fire alarm control panels.
Connect the TX7130 fire and fault relay outputs through a compatible input module to a third-party fire alarm control panel.
Swipe horizontally to view both integration modes.
How Reflective Beam Detection Works
The transmitter and receiver are housed in a single detector. An infrared beam travels towards an opposite reflector and returns to the receiver. Smoke entering the optical path reduces the received signal, enabling the detector to identify a potential fire condition.
The detector transmits an infrared beam towards the opposing reflector.
Smoke particles reduce the light returned through the optical pathway.
The detector processes signal reduction and activates the fire relay when alarm criteria are met.
Simplified Alignment & Commissioning
Integrated laser pointing, digital alignment feedback and adjustable operating settings help installers position and commission the detector across different beam distances.
Built-in laser pointing helps locate the opposite reflector during installation.
Onboard digital feedback assists with optical signal adjustment.
Three selectable sensitivity levels help adapt the detector to site conditions.
Compensates for gradual optical loss caused by dust and component ageing.
Certifications & Compliance
Product approvals and conformity information for professional fire detection applications.
Third-party product approval for fire detection applications.
Standard for line-type smoke detectors using an optical beam.
EU conformity marking under the applicable Construction Products Regulation framework.
